Lionelo Riya Bedienungsanleitung Seite 14

16. Carrycot connector with key
17. Carrycot supports
EN
18. Mattress
How to assemble
Stroller frame unfolding: open the unfolding ock (10) and
1
then pul the hand e up until you can hear a click (fig. 2).
Place the seat on the stroller frame (flg. Ia). Unfold and
2.
secure the seat with a bow until you can hear a click.
Correct assembly of the seat on the frame is signaled by
the click. Make sure the seat has been properly mounted
in the stroller
3. To remove the seat from the stroller frame, press the
release key on both sides of the seat and then lift them
(fig. 1b).
To assemble the seat in a rear-facing position (fig. 10),
4.
press the release key and then lift the seat and place it in
a desired position. The seat is properly mounted when you
can hear a distinctive
To remove the sunshade, unzip it and then pul up plastic
5.
elements on both sides (fig. ld).
To remove seat covering, unzip it around footrest and under
6.
the seat, and unzip be ts at the base of the seat.
How to assemble
7. Slide wheel shank into corresponding
frame (fig. 3).
8. To remove front wheels, press the release key (6) and pu
the wheels
lionelo
and disassemble
frame.
click.
and disassemble
out.
stroller
front wheels
holes on stroller