General Specifications - Klein Tools Digital Probe-Pro Gebrauchsanleitung

ENGLISH
The Klein Tools VDV500-223 Digital Probe-Pro is a professional-series
digital and analog tone tracer, featuring an inductive probe with speaker
for amplification, and LED light for use in dark spaces. It also features a
headphone jack for use in extreme noise environments.
Operating Altitude: 6562 ft. (2000 m) maximum
•
Relative Humidity: 10% – 90% non-condensing
•
Operating Temp: 32° to 122° F (0° to 50°C)
•
Storage Temp: -4° to 140°F (-20° to 60°C)
•
Dimensions: 1.92" × 9.96" × 1.32" (49 × 253 × 34 mm)
•
Weight: 6.88 oz. (195 g) including batteries
•
Battery Type: 4 × 1.5V AAA Alkaline
•
Battery Life: Active: 20 hours
•
Auto-Power Off: After 15 minutes of inactivity
•
Specifications subject to change.
P1 Replaceable Inductive Polymer Tip (VDV999-070)
P2 Worklight
P3 Power/Worklight On/Off Button
P4 Wire Map Indicators*
P5 Shield Indicator*
*P4 + P5 together constitute Signal Strength Indicator Bars
P6 Volume Increase Button
P7 Volume Decrease Button
P8 Battery Status Indicator
P9 Speaker
P10 Lanyard Slot
P11 Digital Toning Mode Button
P12 Analog Toning Mode / 60Hz Filter On/Off Button
P13 Filter Indicator
P14 RJ45 Port
P15 Battery Cover
P16 Battery Cover Screw (#2 Phillips)
P17 3.5mm Headphone Jack*
* CAUTION: Excessive volume can cause permanent hearing damage.
Use as low a volume as possible.
2

GENERAL SPECIFICATIONS

Standby/Storage: 3 years
FEATURE DETAILS