1.4
Learn
to Use
the Treadmill
4. Automatic Control Mode Description
Automatic
This mode is diffcult to control and can be used completely
without the remote control. It is advised to use this mode only
after having gain experience
Use the remote control to start and stop the treadmill, and the
switch
mode
button
is effective
under
this
mode
Note: The automatic control mode is only available under
walking mode
15
o o Ghetreadmill will s peed
up by Standing on this
o
area under automatic
The
treadmill
Will
slow
o o dowrn by standing on this
o
o
area
under
automatic.
5. Remote Control Paring Instructions
If the remote control does not respond or you have replaced
the remote control, you need to pair it again.
Pairing method: Restart the treadmill and press and hold
the
Mode
button
on the
remote
control
AT THE
SAME
TIME
for 5 seconds.
6. Connection
Caution Light
Not
connected
to APP:
Will
flicker
Connected
to APP:
Off
7. Fault Caution Light
EOI : Software
overcurrent
E02• . Hardware
overcurrent
E03:
IPM Module Overheating
E-04: Low-voltage
Protection
E05:
High-voltage
Protection
E06.
• Motor phase loss protection
E07.
Motor block rotation protection
E08:
Sensor
fault
E09:
Motor
unable
to start
E12:
Motor overcurrent
protection
E13:
Overloading protection
E14.
Hall signal loss
E15:
Communication
fault
1.5 Trademark and Legal Notice
The patents involved in Kingsmith WalkingPad Treadmill
series products are made by Beijing Kingsmith Technology
Co., Ltd. and owned by the Company. No organization or
individual may copy, distribute all or any part of this manual
without Kingsmith's written permission, and may not use
these patents without authorization.
When printing this manual, we have put various functional
descriptions
and instructions
in it as far as possible.
However, due to the continuous
improvement
of product
functions
and design changes,
there may still be discrep-
ancies with the products you purchased.
Due to product
update, this manual may deviate from the actual product in
terms of color, appearance,
etc. Please refer to the actual
product.
16