Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.6 G-Sensor
• The built-in G-Sensor detects unusual impacts or vibrations.
• It automatically triggers the Emergency Video Protection.
• Set the sensitivity to automatically trigger this feature with smaller or larger
vibrations (feature can also be turned Off):
Main Menu > Settings > G-Sensor > Off / Low / Medium / High
4.7 Emergency Video Protection
• If G-Sensor is enabled and senses an unusual impact or collision the dash cam
will automatically protect the currently recorded video file from being overwritten.
• A lock '
' icon appears on the top of the screen to signify the current recording
is protected. Beeps sound simultaneously.
• To manually protect a video file during a recording, tap anywhere on the
Screen to bring up the Shortcuts and select the Video Protect '
4.8 Parking Mode (Optional)
WARNING:
• If no Hardwire Kit is connected to the dash cam, the parking monitor will
not work even if it is selected from the menu.
• It is not recommended to select this function if no Hardwire Kit is connected.
• Once Parking Mode is activated, the screen will turn off, Recording will stop,
WiFi & GPS will be disabled.
• In order not to drain the car battery, the dash cam will automatically turn off
after 3 hours of Parking Mode function activated.
• If you power off the dash cam manually by pressing the power button, even
if the Hardwire kit is connected, the dash cam will not enter Parking Mode.
• To activate Parking Mode function, you need to connect the dash cam to your
car battery with additional Hardwire Kit (Not included).
• After connecting a Hardwire Kit, once the car is parked and the engine is off,
the dash cam will record for 5 minutes with enabled Parking Mode.
If the front cam does not detect any motion, vibration/collision, position or
speed change, the dash cam will stop recording after 5 minutes recording,
the screen will turn off and enter Parking Mode.
-14-
' icon.
Werbung
