Z-EDGE T3P Bedienungsanleitung Seite 11

2.7 Rear Camera Installation
WARNING :
Please keep as far away from your vehicle's radio antenna as possible.
FM/AM radio interference may occur. Therefore, please do a temporary test
before permanent installation!
1. Connect one end of the Mini USB cable into the Mini USB Port (8) on
the dash camera. Connect the other end into the Mini USB Port (12)
on the rear camera.
2. Connect the dash cam to power and turn on the camera. The rear-lens view
will automatically appear on the display screen (4) in PiP display mode.
TIP: To view rear-view in full screen, tap the Screen to bring up the Shortcuts
menu, then tap the View icon (H) on the middle right and switch to the
desired view.
3. Whilst looking at the display screen and without removing the adhesive
backing, find a suitable area for installing the rear camera on the rear
windshield.
4. Having found a suitable area on the rear windshield, peel off the protective
plastic backing from the adhesive mount (11). Press firmly against the rear
windshield to secure.
5. For a more organized car environment, the micro USB cable can be routed
as indicated by the dashed line in the diagram.
-8-