Z-EDGE T3P Bedienungsanleitung Seite 10

2.5 Connecting to Power
1. Plug the Micro USB port of the USB charging cable into the car dash cam
Micro USB Port.
2. Plug the other end into the car charger, and insert it into your vehicles lighter
socket.
WARNING:
• Use only the supplied car charger to power the dash cam.
• Some car models supply power from the cigarette lighter even when the
vehicle's engine is switched off. We recommend you always unplug the
USB charger manually before leaving the vehicle to avoid any unwanted
car battery drainage.
2.6 Powering the Dash Camera
Automatic Power
• Once the vehicle's engine is switched on, the dash cam will automatically
power on.
• Once the vehicle's engine is switched off, the dash cam will automatically
save the recording and power off.
Manual Power
• To manually turn on the dash camera , press and hold the Power Button (3)
for 3 seconds.
• To manually turn off the dash camera, press and hold the Power Button (3)
for 3 seconds.
-7-