Ninja DETECT POWER BLENDER PRO Gebrauchsanweisung Seite 17

PARTS
A Jug Lid With Pour Spout
B Ninja Detect Total Crushing
& Chopping Blades
(Stacked Blade Assembly)
C 2.1 L* Full-Size Jug
D Spout Lids x2
E
Hybrid Edge™ Blades Assembly
F 700ml Single-Serve Cups x2
G Motor Base
(attached power cord not shown)
*1.9 L max liquid capacity.
To purchase more accessories and find
great recipes, visit ninjakitchen.eu.
BEFORE FIRST USE
IMPORTANT: Review all warnings at the beginning of this Owner's Guide before proceeding.
WARNING:
The Stacked Blade Assembly is NOT locked in place in the jug. Handle the Stacked
Blade Assembly by grasping the top of the shaft.
1 Remove all packaging materials from the unit. Exercise care when unpacking the Stacked Blade Assembly
and Hybrid Edge Blades Assembly as the blades are loose and sharp.
2 Handle the Hybrid Edge Blades Assembly by grasping around the perimeter of the blade assembly base.
3 Wash containers, lids, and blade assemblies in warm, soapy, water using a dishwashing utensil with a
handle to avoid direct contact with the blades. Exercise care when handling blade assemblies, as the
blades are loose and sharp.
4 Thoroughly rinse and air-dry all parts.
5 Wipe control panel with a soft cloth. Allow it to dry completely before using.
NOTE: All attachments are BPA free. Accessories are top-rack dishwasher safe and should NOT be
cleaned with a heated dry cycle. Ensure blade assemblies and lids are removed from the containers
before placing in the dishwasher. Exercise care when handling blade assemblies.
ninjakitchen.eu
A D
B
E
C
F
G
BLENDSENSE TECHNOLOGY
Intelligent BlendSense program revolutionises traditional blending by sensing your ingredients and
blending to perfection every time. The BlendSense program will be active by default. Press
then START/STOP. Once the program begins, it will automatically stop when blending is complete. To
stop blending before the end of the program, press the dial again.
Simply press the dial to start the BlendSense program.
1
SENSE
Starts blending Automatically chooses
to sense your the blending speed,
ingredients. time, and pulses.
BlendSense is best used to achieve smooth blends such as smoothies,
frozen drinks, smoothie bowls, dips, purées, and sauces.
INITIAL BLENDING
SENSING
In the first 15 seconds, actively adjusts speed and time based on ingredients and recipe size.
BLENDING POSSIBILITIES
BLENDING CRUSH AND MAX-CRUSH
Detects tougher and frozen
Blends continuously
without pulsing. ingredients, then adjusts the pulsing
pattern for a smooth blend.
NOTE: Once blending possibility is selected, runtime will count up on the display in seconds. Total
time varies from seconds up to almost two minutes.
ERROR DETECTION
INSTALL
Illuminates if no vessel
is installed or if a vessel
is installed incorrectly.
To resolve, reinstall
the vessel.
2 3
BLEND ENJOY
Blends to perfection,
no matter the
portion size.
THICK MODE
Creates thick
spoonable results.
ADD LIQUID
When using the Single-Serve Cup, this illuminates
if, during blending, your recipe requires more
liquid to blend. When "ADD LIQUID " displays
on the dial, press START/STOP and remove the
cup from the base. Add 120-240ml of additional
liquid. Reinstall the cup, then press START/STOP
to run the BlendSense program again.
ninjakitchen.eu
button,