eQ-3 HomeMatic IP HmIP-HAP Installations- Und Bedienungsanleitung Seite 17

TrHualeshHHting
7.3 Error codes and flashing sequences
Flashing code
Permanent orange ligh-
ting
Fast blue flashing
Permanent blue lighting
Fast yellow flashing
Permanent yellow ligh-
ting
Permanent turquoise
lighting
Fast turquoise flashing
Alternately long and short
orange flashing
Fast red flashing
Fast orange flashing
1x long green lighting
1x long red lighting
Meaning
Access Point is starting
Connection to the server
is being established
Normal operation, con-
nection to server is esta-
blished
No connection to net-
work or router
No Internet connection
Router function active
(for operation with seve-
ral Access Points/Central
Control Units)
No connection to Central
Control Unit (only when
operating with CCU3)
Update in progress
Error during update
Stage before restoring
the
factory settings
Reset confirmed
Reset failed
Solution
Please wait shortly and
observe the subsequent
flashing behaviour.
Wait until the connection
is established and the LED
lights permanently blue.
You can continue opera-
tion.
Connect the Access Point
to the network/router.
Please check the Internet
connection and firewall
settings.
Please continue the ope-
ration.
Check the network con-
nection of your CCU
Please wait until the up-
date has been completed
Please check the server
and Internet connection.
Re-start the Access Point.
Press and hold down the
system button again for
4 seconds, until the LED
lights up green.
You can continue opera-
tion.
Please try again.
17