eQ-3 HomeMatic IP HmIP-HAP Installations- Und Bedienungsanleitung Seite 15

tart-um
6 tart-um
This chapter describes how to set up
your Homematic IP system step by
step.
First install the Homematic IP app on
your smartphone and set up your Ac-
cess Point as described in the following
section. Once your Access Point has
been set up successfully, you can add
and integrate new Homematic IP de-
vices to your system.
6.1 Set-up and mounting of the
Access Point
The Homematic IP app is available
for iOS and Android and can be
downloaded for free in the corre-
sponding app stores.
• Download the Homematic IP app
in the app store and install it on
your smartphone.
• Start the app.
• Place the Access Point close to
your router and a socket.
Always keep a minimum distance
of 50 cm between the
Homematic IP Access Point and
your WLAN router.
• Connect the Access Point with the
router using the supplied network
cable (F). Provide power supply for
the device using the supplied plug-
in mains adapter (G).
G
Figure 2
• Scan the QR code (B) on the back
side of your Access Point. You
can also enter the device number
( SGTIN) (B) of your Access Point
manually.
• Please confirm in the app if the LED
of your Access Point lights up per-
manently blue.
If the LED lights up differently,
please follow the instructions in
the app or (see „7.3 Error codes
and flashing sequences" on page
17).
• The Access Point is registered to
the server. This may take a few mi-
nutes. Please wait.
• After successful registration, please
press the system button of your
Access Point for confirmation.
• Pairing will be carried out.
• The Access Point is now set up and
immediately ready for use.
6.2 First steps: Pairing devices and
adding rooms
As soon as your Homematic IP Access
Point and the Homematic IP app are
ready for use, you can pair additional
F
LAN
15