Comfee CTG 3.6FB Gebrauchsanweisung Seite 72

Electrical requirements
Look at the type of plate to check the rated voltage and connect the dishwasher to a suitable
power supply. Use the required 10A/13A/16A fuse, a time-delay fuse or a recommended
circuit breaker and provide a separate circuit that supplies power to this appliance only.
Electrical connection
Ensure that the voltage and frequency of the power supply correspond to the specifications on
the rating plate. Only insert the plug into a power outlet that has been properly earthed. If the
power outlet to which the appliance must be connected is unsuitable for the plug, replace the
power outlet instead of using an adapter or equivalent, as this may result in overheating and
fire.
Ensure that the appliance is proper earthed prior to use.
Water supply and drainage
Cold water connection
Connect the cold-water safety supply hose to a threaded 3/4 (inch)
connector and make sure it is securely attached. If the water pipes
are new or have not been used for a long period of time, let the water
run to ensure that the water is clear. This precaution is necessary to
avoid the risk of blocking the water supply and damaging the
appliance.
safety supply hose
Information on the safety supply hose
The safety supply hose consists of double walls. The hose system blocks the flow of water
if the supply hose ruptures and the air space between the supply hose and the outer
corrugated hose is filled with water.
30