Herunterladen Diese Seite drucken

Marmitek IR Control Pro System Kurzanleitung Seite 2

Vorschau ausblenden Andere Handbücher für IR Control Pro System:

Werbung

Technical Specifications
This IR extender cable with 2 blinking LEDs is part of the IR Control Pro System.
The IR extender cable receives infrared commands from the IR System Module
and converts these into infrared signals via the IR LEDs. Install this product
according the user manual of the IR Control Pro System (see
www.marmitek.com).
IR extender cable with 2 blinking LEDs
Connection:
3.5mm jack plug (mono)
IR LEDs:
2x IR LED (blink when transmitting IR signals)
Length of cable:
3 meters (plug to divison 2m, divison to LED 1m)
Copyrights
Marmitek is a trademark of Marmidenko BV | IR Control Pro System™ is a trademark of
Marmitek BV. All rights reserved.
Copyright and all other proprietary rights in the content (including but not limited to model
numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the
Content, but without limitation, distribution, reproduction, modification, display or transmission
without the prior written consent of Marmitek is strictly prohibited. All copyright and other
proprietary notices shall be retained on all reproductions.
(1) Locate IR sensor of A/V Device
(2) Remove self-adhesive strip and attach IR LED
-
+
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed
of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the government or local authorities. Correct
disposal and recycling will help prevent potential negative consequences to the environment and human health. For more
detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
IR Sensor
IR blinking LED

Werbung

loading