Driver Installation - MIXVIBES U46MK2 Handbuch

U46MKII MIXVIBES

4. Driver Installation

After connecting and powering the U46MKII, your computer will automatically detect the
U46MKII as a USB Composite Device and will proceed with the installation.
1. To confirm the installation of the U46MKII, go to 'Start-> Settings-> Control Panel ->
System -> Device Manager'. Confirm that two (2) instances of "USB Audio Device" are listed
under 'Sound, video and game controllers' and that one (1) "USB Composite Device" is listed
under 'Universal Serial Bus controllers'.
2. Check your system.
Go to: Control Panel > Sounds and Audio Devices > Audio
Please check that your audio devices are installed properly.
Important note
Due to the limitations of the USB 1.1 driver, audio output at 48 kHz sample rate is
limited to 4 channels. If you need better audio quality and don't need all 6 outputs,
you can choose the 48 kHz sample rate. If you need all 6 outputs for your work, you
must choose the 44.1 kHz sample rate.
9