Application Setup; Windows® Multimedia Setup - MIXVIBES U46MK2 Handbuch

U46MKII MIXVIBES

6. Application Setup

This chapter contains basic configuration example with the MixVibes 3DEX DJ Software. Please
also refer to the manual of the audio software you use for detailed information.
Important note
Due to the limitations of the USB 1.1 driver, audio output at 48 kHz sample rate is
limited to 4 channels. If you need better audio quality and don't need all 6 outputs,
you can choose the 48 kHz sample rate. If you need all 6 outputs for your work, you
must choose the 44.1 kHz sample rate.
6.1. Windows® Multimedia setup
The Windows Multimedia setup is required if you want to use your U46MKII system as the
main sound device for Windows multimedia applications. Go to My computer-> Control panel -
> Sounds and Audio Device Properties -> Audio. Select the U46MKII driver as your playback
and recording device.
Important note
You must not use same ASIO driver at the same time otherwise a sample rate error
will occur. For example, if you set the 'U46MKII' as your windows multimedia
playback device, you should not choose a different ASIO driver for your audio
application. Otherwise the setup might fail when Windows sound scheme is played.
18