MIXVIBES U46MK2 Handbuch Seite 14

U46MKII MIXVIBES
(1) Config – Mouse Wheel
Determine the speed of your mouse wheel in the adjustment of input/output levels
(2) Config – Latency
Choose the latency for your U46MKII. A good average value is 256
(3) Config – Factory Default
Reset the settings to factory default
(4) Config – Always on Top
Allows you to keep the interface on top of other applications.
(5) Config – SampleRate
Choose your sample rate between 44100Hz or 48000Hz.
Important note
Due to the limitations of the USB 1.1 driver, audio output at 48 kHz sample rate is
limited to 4 channels. If you need better audio quality and don't need all 6 outputs,
you can choose the 48 kHz sample rate. If you need all 6 outputs for your work, you
must choose the 44.1 kHz sample rate.
(6) Config – Buffer Number
Allows you to modify the number of buffers to diminish or improve latency and system
stability.
14