Herunterladen Inhalt Inhalt Diese Seite drucken

Gaszufuhr Über Hausanschluß Oder Gasflasche; Connecting To The Central Gas Supply Or To A Gas Cylinder - Integra Fireboy Plus Bedienungsanleitung

Mobiler bunsenbrenner mit sensor-zündung netzabhängiger bunsenbrenner
Vorschau ausblenden Andere Handbücher für FIREBOY plus:
Inhaltsverzeichnis
Schraube ① an der Unterseite des Gerätes
herausdrehen.
Düse entnehmen.
Gewünschte Düse einsetzen.
Schraube ① wieder fest bis zum Anschlag
eindrehen.
Gaszufuhr über Hausanschluß
oder Gasflasche
Entsprechenden Adapter für Gasanschluß
in die Öffnung ③ (= Gas Inlet) hörbar ein-
rasten lassen.
Entweder Schlauch vom Hausanschluß
oder von der Gasflasche auf Adapter auf-
schieben und falls notwendig mit einer
Schelle sichern.
Beim Wechseln der Adapter:
Betriebsarten ausschalten ! Alle grünen
LEDs müssen aus sein !
Gaszufuhr schließen.
20
Remove screw ① from the base of the
instrument.
Remove the nozzle.
Insert the required nozzle.
Replace screw ① tightly in position.
Connecting to the central gas
supply or to a gas cylinder
Connect the gas adapter to gas inlet ③,
making sure it audibly clicks into position.
Connect the pipe from the central supply
or from the gas cylinder to the adapter and
fix with a clip if necessary.
Changing the adapter:
Switch off all operating modes - all green
LEDs must be extinguished !
Close off the gas supply.
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fireboy eco

Inhaltsverzeichnis