Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Attention for Rope Handling
Do not operate the pump without a pressure hose to prevent twisting around its axis.
•
Regularly check the condition of the rope if continuously used, as it may weaken over time.
•
Attach long, strong ropes to the handle before the first use for balancing when immersed.
•
Usable Range
The pump is suited for:
Basements and shafts to prevent water accumulation.
•
Automated water supply, drainage, and pressurized irrigation.
•
Applications in home, agriculture, gardening, plumbing, and similar contexts.
•
Cleaning and Maintenance
Prohibited Materials: Do not transport corrosive, flammable, or explosive substances, like
•
gasoline or oil. Avoid use with high-temperature liquids, corrosive substances, sewage, or
low-mobility mud.
Temperature Limit: The liquid's temperature must not exceed 35°C.
•
Cleaning Method: Clean equipment externally with clean water, softer brush and detergent
•
for stubborn grime. Run the pump briefly in clean water to flush the system.
Storage
If frost is possible, remove and clean all equipment and store it in a frost-free environment.
•
Warning: Always unplug before maintenance and open the outlet valve to release pipeline
•
pressure.
Additional Warnings and Precautions
Ensure the pump is free from dirt residues before reuse to prevent operational issues.
•
Frost can damage the pump and accessories; ensure they are dry and stored correctly in
•
positive temperatures.
Troubleshooting
Error shooting
The device
1. Unconnected power
cannot start or
stops suddenly
2. Pressure state at rest
3. Impeller damage
Reasons
supply or defective
power cord/plug
due to blockages
causing blockage
EN
Response measures
1. Check the power supply and inspect safety
devices. Consult a professional for
electrical inspection if needed.
2. Open the outlet valve to relieve pressure.
Remove any blockages from pipes or the
pump. Allow the pump to cool completely
before recharging it with water.
Werbung
