Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Preparing for Use and Installation of the Pump
Installation
1. Space Requirement:
Ensure the installation area has a minimum cross-sectional area of 20x20 cm.
o
2. Immersion Depth:
Immerse the equipment to the depth specified in the technical parameters.
o
3. Suction Opening:
Make sure the suction opening is free from any obstructions during installation to
o
maintain equipment stability.
Caution!
Risk of Equipment Damage:
•
Do not lift the pump using the cable or pressure hose, as these components are not
o
designed to withstand the tensile force of the pump's weight.
Warning!
Connection Integrity:
•
Ensure that all connection lines and joints are sealed effectively. Leaks can cause
o
frequent operation and reduce the equipment's lifespan.
Connect the Pressure Pipe
Pipe Connection:
•
Screw the pressure pipe securely into the pressure joint. All connections should be
o
sealed with a threaded seal belt.
Hose Adapter:
•
If using a pressure hose, screw the appropriate pressure hose adapter into the
o
pressure joint.
Hose Attachment:
•
Firmly attach the pressure hose to the hose adapter and secure it with a hose clip.
o
Occasional Use:
•
For occasional use, opt for appropriate plumbing. For fixed positions, rigid pipes with
o
check valves are recommended to prevent fluid backflow when the machine is
turned off.
Operation
Rope Connection:
•
EN
Werbung
