Nitho Adonis Kurzanleitung Seite 5

WIRELESS CONNECTION SETUP
CONSOLE
1. Turn on the console.
2. Plug the USB data cable into
3. Press and hold the "N" button, the LED bar lights up, then
your controller is connected.
4. For future connections, you can press the "N" button on the
controller and it will automatically log into the console.
Note
adonis
To connect
to Micro-B.
After the initial pairing, the data cable is no longer required.
PC, IOS® & ANDROID®
1. Switch on the device/PC and your Bluetooth® feature.
2. Activate the Bluetooth® search mode of your device/PC
by clicking on "Add New Bluetooth® Device".
3. Press and hold the "N" + "SHARE" buttons for a few
seconds until the LED front bar starts flashing quickly.
4. Choose "Wireless controller" and tap "Pair" on your
device/PC to connect adonis.
5. The front LED bar light will stop flashing and your controller
will be connected.
TROUBLESHOOTING
If you are unable to connect the
console or device/PC, press the Reset button located in the
small hole in the rear of the controller.
adonis
to the console, you need a USB data cable
adonis
and console.
controller to the