Dtmf Tone; Compander - Albrecht Tectalk Duro XS Bedienungsanleitung

Press the PTT or MODE button or wait for 5 seconds to store
your choice. The DCS icon will appear when a Digital Privacy
Code is selected.
Once a CTCSS or DCS code has been selected, you can
conveniently deactivate or re-activate the tone function.
Press and hold the monitor key to deactivate or re-activate the
tone function. The tone function can only be activated if a tone
code has been selected.

9.4. DTMF TONE

Selecting this allows the other party never to miss your initial
message that might arrive before the audio of the other party's is
open to receive. This can be activated or de-activated.

9.5. Compander

the unrefi ned sound are recommended to use the radio with this
compander unactivated.
To change the setting, press the MODE button until the Com-
pander icon and current setting display. Use the UP or DOWN
button to change the setting. Press the PTT or MODE button or
wait for 5 seconds to store your choice.
The Compander icon will appear when Compander is active.
The DTMF tone is a kind of combinations
of short tones. The DTMF tone can pream-
ble to the message upon every press of the
PTT button.
If the compander is activated, your radio
will eliminate the background noise and ge-
nerate clearer sound by cutting off the high
and low.frequencies. The users who prefer
English 37