Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance; Storage - Philips TT3003 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für TT3003:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29

Cleaning and maintenance

Storage

- See chapter 'Preparing for use', section 'Tanning advice' for information
about sun exposure and artificial tanning.
To ensure optimal results and a long life for the appliance, clean
the appliance before and after each use and, if necessary, also
during the treatment. The appliance loses its effectiveness if you
do not clean it properly.
Never clean the appliance or any of its parts under the tap or in
the dishwasher.
Never use scouring pads, abrasive cleaning agents or aggressive
liquids such as petrol or acetone to clean the appliance.
Never scratch the light exit window or the metallic surface inside
the body attachment.
Note: Make sure that the contact switches of the safety ring do not get
congested with dirt.
Note: Stop using the appliance when it is no longer possible to clean the
light exit window or the body attachment.
1 Switch off the appliance, unplug it and let it cool down.
Note: The light exit window becomes hot during use. Make sure it has
cooled down before you clean it.
2 To remove the body attachment, put your fingers in the recesses at the
top and bottom and pull gently. The attachment should come off easily.
3 Moisten the soft cloth supplied with the appliance with a few drops of
water and use it to clean the following parts:
-
the light exit window
-
the outside surface of the body attachment
-
the metallic frame inside the body attachment
Note: If water does not clean effectively, use a few drops of
highpercentage alcohol to clean the parts mentioned above.
Note: A contaminated light exit window can look like this picture. Make
sure you clean the appliance before and after each use and, if necessary,
also during the treatment according to the instructions in this section.
4 If necessary, clean the outside of the appliance with the dry soft cloth
supplied with the appliance.
Tip: If it is no longer possible to clean the edges of the attachment with
the cleaning cloth supplied, use a cotton bud instead. Make sure that no
fluff of fibres stay behind on the attachment or on the light exit window.
1 Switch off the appliance, unplug it and let it cool down.
2 Clean the appliance before you store it.
3 Put the appliance in the pouch supplied.
21
English

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis