DeFelsko Testex Bedienungsanleitung Seite 11

Verifying the Gage
Verification shims are available as an optional accessory.
Connect to Computer
Readings stored in memory can be downloaded to a computer for
viewing, storing, and creating reports. Use the supplied cable and
connect to the gage using the USB-C port on the side of the
micrometer.
USB Drive Mode—Retrieves data in a manner similar to a flash drive
in .csv format. No software to install or internet connection required.
PosiSoft Desktop—Powerful desktop software (PC/Mac) for
downloading, viewing, printing and storing measurement data. Includes
a customizable, templated PDF Report Generator.
Learn more at www.defelsko.com/posisoft
Troubleshooting
Before returning the instrument for service:
1. Install new or newly recharged battery in the proper alignment as
shown within battery compartment
2. Clean the micrometer anvils (pg. 4)
3. Perform a Reset (pg. 8) and Zero the gage (pg. 6)
IMPORTANT:
If these steps do not resolve the issue and the Gage must be returned
for service, please follow the instructions provided at
www.defelsko.com/service
9