Danfoss 014G0158 Installationsanleitung Seite 7

Installation Guide
Installation
VIFZA55X
Danfoss Link™ RS
1. Turn the device around so the
back is facing you.
2. Remove the back panel by gently
pressing your thumbs on the
panel and pull downwards.
3. Fix the back panel to the wall
either help of screws or adhesive
on the desired destination.
4. Insert the batteries.
5. Install the Danfoss Link™ RS front
by gently letting it slide on the
back panel again.
© Danfoss 03/2012
GB
7