PeakTech 4065 Bedienungsanleitung Seite 60

6.4. Burst characteristics of CH A
Waveform: 16 kinds of waveforms including sine, square, Ramp and so on
Repeated period: 1 μs ~ 500 s
Pulse count: 1 ~ 1000000
Start phase: 0° ~ 360°
Trigger source: internal/external/single
6.5. Sync output characteristics
6.5.1. Waveform characteristics
Square, edge time≤20nS
6.5.2. Level characteristics
TTL compatible
6.5.3. Impedance characteristics
50 Ω nominal
6.6. Modulation input
6.6.1. Input voltage
5 Vpp full scale
6.6.2. Input impedance
>10 kΩ
6.7. Trigger input
6.7.1. Input level
TTL compatible
6.7.2. Input impedance
>10kΩ
6.8. Frequency measurement
6.8.1. Input frequency
1 Hz ~ 100 MHz
6.8.2. Input amplitude
100 mVrms ~ 7 Vrms
6.8.3. Strobe time
50 ms ~ 5 s
6.9. Programmable interface
USB device interface, USB host interface
-59-