Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 Function details
-
--
Easy-ironing
Makes it easier to iron your laundry
This option also enables you to wash and
spin your clothing more delicately while
retaining identical wash performance.
Hold and rinse
This function is for textiles that you do not
want to spin, or if you expect to be away for
a long time after washing finishes.
This function stops the cycle before the
final spin so your laundry stays soaked in
water to avoid creasing.
@ When the machine is stopped full
of water, the "Holding at Rinse" icon
flashes and the "Programme stopped"
message is displayed until the cycle
ends.
- If you want to drain and spin.
Turn Selector [1] to "Spin" and use knob [2]
to choose a speed suitable to your laun-
dry load, then push "StarVPause" [5]. The
screen displays "Spin" and the spin speed,
and the programme finishes automatically
- if you want only to drain. Turn Selector [1]
to "Spin" and use knob [2] to choose "000",
then push "Start/Pause" [5]. The screen dis-
plays "Drain" and the spin speed, and the
programme finishes automatically.
Opti40
This programme efficiently washes a full
cotton load at 40°C whilst economising on
electricity
End time ®
As soon as the programme starts, the dis-
play shows the chosen end of cycle time"
e
The time shown by the machine at the
start of the programme can vary during the
cycle:
- if you change the washing temperature
(even during spin), or if you add or cancel
any options, the time will be re-calculated
- Some operating problems (unbalanced
load or excess of foam) can alter the cycle
length and thus the displayed end time.
- If the power supply is cut during the wash-
ing phase, when the power is restored,
the time displayed can be earlier than the
real end time. This time will be updated at
the start of the rinsing phase.
Load out of balance": when you wash
very small amounts of laundry it can
ball up in the drum. This prevents your
machine working at its best.
Activating sound alarm
Your washing machine has a sound alarm
that you can activate or de-activate by
pushing on "Easy Ironing" and "Extra rinse"
simultaneously for 3 seconds. Screen L
shows 'Buzzer:YES" and the machine
makes a beep when the alarm is activated.
Screen L shows "Buzzer:NO" and the
machine makes two beeps when the alarm
is de-activated.
Screen L shows "Buner:NO" and the
machine makes one beep when the alarm
Language selection
You can change the display language by
pushing the Opti40° and Pre-wash button
simultaneously for two seconds.
In default the display shows "Language:
English".
Turn the time adjustment button [R] to
change the language.
Confirm the new language by pushing
StarVPause button [5].
®
,
19
Werbung
