Before Use - Renpho Rf-Gm168 Bedienungsanleitung

Before Use

Fully charge the massager before first use. Make sure the power
switch at the bottom of the device is in the 'OFF' position while
charging.
1. Insert the adapter into the bottom of the device.
2. While charging, the battery display window will flash.
3. When fully charged, the battery display window shows "10".
Note: Charge the device for 6 hours under 'OFF' status every two
months when not in use for a long time.
Use The Massager
1. Turn 'ON' the device at the bottom of the deivce. Note that if there is
no operation within 3 minutes, the device will enter standby mode.
You can wake it up by pressing any key on the screen.
2. Press the "
3. Press " " "
4. When battery power is less than 10%, the battery indicator on the
display will show "00" indicating low battery, please charge it
immediately.
5. This device has a timing function and will automatically stop running
after 15 minutes of operation.
6. The product has locked-rotor protection. When the massage head is
strongly pressed, the device may stall and stop working. The power
window displays "E4", you can switch off and on to restart it.
7. When powered on, the product will enter sleep mode after 3 minutes
without operation. To wake up the device, you can press any key,
re-plug the adapter, or switch off and on to wake up the device.
8. Insert the massager heads into the host for use; Take off the heads
for storage.
" to power on the massager.
" to adjust speed levels among 1-20.
04