Automatic deactivation
• Press the timer key
• Press the keys [
and
• Wait 5 seconds until the timer is confirmed and the timer's indicator light is on.
• When the set number of hours have passed, the appliance switches off automatically.
To cancel automatic deactivation, press the timer key
CHANGING THE TEMPERATURE UNIT - CELSIUS / FAHRENHEIT
When the appliance is on, press down the [
temperature unit from °C (Celsius) to °F (Fahrenheit) and vice versa. Example: if the appliance is on
COOLING 24°C, the display shows 24 as indicated to the right. After changing the temperature unit, the
display shows 75.
THE REMOTE CONTROL
ON/OFF key
up key
down key
timer key
key for temperature unit
Aim the remote control to the sensor of the appliance. The range of the remote
control is approx. 7 metres (without obstacles between the appliance and the
remote control).
Insert the two supplied AAA 1.5 Volt batteries in the remote control, as indicated in the drawing.
Do take the plus and minus symbols on the inside of the remote control into account.
Note:
• If the remote control is replaced or is no longer used, remove the batteries and dispose them
in accordance with applicable legislation, as they are harmful to the environment.
• Do not mix old and new batteries. Do not use a mix of alkaline, standard (carbon-zinc) or chargeable (nickel-cadmium) batteries.
• Batteries could explode or leak when exposed to open fire. Hand in batteries at a waste collection facility or recognised waste col-
lection point.
• Remove the batteries from the remote control when the appliance is not being used for a longer period of time (winter storage) and
keep them on a cool, dry place.
Other functions
The remote control can be used for the same functions as described above. Via the remote control you can control extra functions,
such as the sleep mode.
SLEEP MODE
Use the sleep mode when you want to use the appliance at night. Slowly the appliance starts working less and less. The display dims
automatically and the wind speed is at the lowest position.
• Switch on the appliance on the - cooling - position.
• Press the sleep key
. The display dims automatically and the wind speed goes to the lowest position.
The sleep mode maintains the optimum temperature in the room, without excessive fluctuations in temperature and air humidity,
while working silently. The wind speed is always low, while room temperature and air humidity vary slightly to make sure the room
remains comfortable.
The selected temperature will rise every hour by 1°C for a period of two hours. This new temperature is maintained for the next 6
hours. Then the appliance switches off automatically.
The sleep mode can be cancelled by pressing the sleep
when the appliance is on. The timer's indicator light and the hours on the display will flash.
] to set the required time.
/
] keys simultaneously for 3 seconds to change the
once more or press the on/off key
wind speed key
mode key
swing key (not available on this model)
sleep mode
, mode
or wind speed
.
max. 7 metres
key .
33
English
•