Greencut JET380X Wartungsanleitung Seite 70

ASSEMBLY
STEP BY STEP
ASSEMBLING THE SPRAY GUN
Connect the spraying lance to the manual spraying gun.
REPLACE THE CAP
Remove the pump plug and replace it with the dipstick supplied.
ASSEMBLING THE SPRAY GUN
Fit the high pressure hose to the gun.
CONNECT THE HOSE
Connect the high pressure hose to the pressure washer.
70
ASSEMBLING THE SPRAY GUN
Tighten the thread of the spraying lance by hand.
0° 1 5° 25° 40°
CONNECT THE HOSE
Connect the water inlet hose to the pressure washer.
EN - JET380X
soap