Triole action control unit
Hydraulic connection
Single-action control unit
- Connect pressure hose (P) to the single-
action control unit.
1. Put lever switch into position "PU".
2. Engage control valve (ST) to "RAISING" as the pick-up is raised properly.
The raised pick-up enables a later moving the trailer by hands .
Attention! Do not overload the jockey wheel with this action. Move the trailer only on even and firm surface.
3. Put lever switch into position "0".
4. Engage the control valve (ST) shortly to "DOWN".
Trough this you can decrease the rest pressure in the hydraulic line. The later uncoupling or the later coupling could be done without pro-
blems.
5. Park trailer on the jockey wheel.
6. Uncouple hydraulic line (P).
9500-GB HYDR. PU+KD_507
The triple action control unit is for switching between the hydraulic raising of the pick-up
(PU) and the hydraulic pivoting Drawbar (KD).
ST =
Control valve
0
= 0-position
PU = Raising the pick-up
KD = Hydraulic pivoting drawbar
P
= Pressure hose
1. Put lever switch into position "PU".
2. Engage control valve (ST).
1. Put lever switch into position "KD".
2. Engage control valve (ST).
Uncoupling the pressure hose (P) from the tractor
TRIPLE ACTION CONTROL UNIT
Operation
Raising the pick-up
Hydraulic pivoting drawbar
- 12 -
GB