Kemper FilterTable-Serie Betriebsanleitung Seite 63

5. Screw the support frame (item 4) and the spark plate (item 6) to the
filter unit using the spacer sleeves (item 7) as shown in the illustration.
6. Connect the table legs (item 2) to the strut (item 9).
7. Then screw the table legs (item 2) to the support frame (item 9) as
shown in the illustration.
1501932-00
Fig. 22: Installation - Support frame + spark plate
Fig. 23: Installation - Table legs
- 63 -
EN