Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING
Danger due to the product falling over!
Serious injuries due to the product tilting/falling over.
•
Before moving, release the brakes on the castors (if available).
•
Move and set down the product only on flat, smooth floor coverings.
•
Only move or transport the product using the transport lugs/handles
provided.
•
Observe the total weight, attachment points and centre of gravity of
the load.
•
Do not sit on or climb onto the product.
•
Only transport the product without load/workpieces.
WARNING
Health hazards caused by welding fume particles
Do not inhale welding dust / smoke! Serious injury to the lungs and
respiratory tract is possible!
Sweat smoke contains substances that can cause cancer!
Skin contact with cutting and welding fumes etc. can cause skin irritation
in sensitive persons!
Repair and maintenance work on the product may only be carried out by
trained and authorised personnel while complying with the safety rules
and the applicable accident prevention regulations.
To avoid contact with and inhalation of the dust particles, wear
disposable overalls, protective goggles, gloves and a suitable Class FFP2
respiratory protection filter mask in accordance with EN 149.
The release of hazardous dust particles during repair and maintenance is
to be avoided to ensure that persons not charged with the task are not
affected.
CAUTION
Health hazard due to noise!
The product can produce noise, please refer to information in the
technical data. In connection with other machines and/or local
conditions, a higher noise level can occur at the operation site of the
product. In this case, the operating company is obliged to provide the
operating personnel with the appropriate protective equipment.
1501932-00
- 53 -
EN
Werbung
