EDIFIER R1010BT Bedienungsanleitung Seite 5

Specifications
Poweroutput:
Noise level:
Inputtype:
Inputsensitivity:
Frequency response:
Bass driver:
Treble driver:
7
English
ML: 12W+12W
< 25dB(A)
Dualstereo RCA ports, Bluetooth
Line in A: 700mV±50mV
Line in B: 500mV±50mV
Bluetooth: 400mFFS±50mFFS
65Hz-17KHz
4 inch (106mm)
(I) 13mm
Problem Solution
No sound • Checkif the powerindicatorlight is turnedON
• Try to turn up the volumeusingeitherthe mastervolume
control.
• Ensurethe audio cablesare firmly connectedand the input
is set correctlyon the speakers.
• Checkif there is a signaloutputfromthe audiosource.
• Makesurethe speakeris switchedto Bluetoothinput. If
Cannot connect via Bluetooth
it is in other audio input modes,Bluetoothwill not
connect.
Disconnect f rom any Bluetoothdeviceby pressingand
holdingthe volumedial in Bluetoothmode,then try again.
• EffectiveBluetoothtransmissionrange is 10 meters;
pleaseensurethat operationis withinthe range.
• Try another Bluetoothdevicefor connection.
The RI 01 OBT does not turn on • Checkif mainpoweris connected,or if the wall outlet is
switched
To learn more about EDIFIER, pleasevisit wmv.edifier.com
For Edifierwarrantyqueries,pleasevisit the relevantcountrypageon www.edifier.com and reviewthe
sectiontitled WarrantyTerms.
USAand Canada:service@edifier.ca
SouthAmerica:Pleasevisit www.edifier.com (English)or wmv.edifierla.com (Spanish/Portuguese) for
local contact information.
Troubleshooting
on.
8
English