Seite 2
EN Important safety instruction • Please read the instructions carefully. Keep it in safe place for future reference. • Use only accessories approved by the manufacturer. • Install the instrument properly by following the instructions in the device connection section. •...
What’s in the box Passive speaker Active speaker 3.5mm-3.5mm audio cable User manual Note: • Images are for illustrative purposes only and may differ from the actual product. • For the need of technical improvement and system upgrade, information and specifications contained herein may be slightly different from actual product.
Seite 4
Functional operation 1. Earphone port 2. Power switch/volume control Power ON: rotate the knob to the right, it’s ON if there is a "click" prompt tone Power OFF: rotate the knob to the left, it’s OFF if there is a "click" prompt tone Volume up: rotate the knob clockwise Volume down: rotate the knob counterclockwise 3.
1. Connect the included USB cable to the computer, then rotate the "power switch/volume control" knob clockwise to power on. 2. The computer will recognize the "EDIFIER R19BT" USB device and automatically switch to the USB audio streaming output. 3. If not switch automatically, please open the sound settings of the computer and select the output device as "Speaker (EDIFIER R19BT)", the speaker is ready to use.
Press to switch to Blutetooth input USB Power Plug 1. Press the "mode switch button" to switch to Bluetooth input. Blue LED will blink slowly. 2. Select "EDIFIER R19BT" in your device setting to connect. Blue LED will be steady lit after connected.
• Try another Bluetooth device for connection. Noise coming from speakers • EDIFIER speakers generate little noise, while the background noise of some audio devices are too high. Please unplug audio cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no problem with this product.
Seite 8
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product.
Seite 9
FR Consignes de securite importantes • Lisez toutes ces instructions avec attention. Conservez-les avec soin pour référence future. • N'utilisez que les pièces et accessoires certifiés par le fabricant. • Installez le produit correctement en suivant les instructions données dans la section concernant la connexion du dispositif.
Contenu de la boîte Haut-parleur passif Haut-parleur actif Câble audio 3,5mm-3,5mm Manuel d'utilisateur Remarque: • Les images utilisées servent de référence uniquement, et peuvent ne pas correspondre au produit. • Les informations et spécifications contenues dans ce document peuvent varier légèrement par rapport au produit réel, car nous apportons constamment des améliorations techniques et système à...
Seite 11
Fonctionnement 1. Port pour casque 2. Bouton d'alimentation/contrôle de volume Allumer : tournez le bouton à droite. Une tonalité de notification « clic » retentit si l'appareil est allumé Éteindre : tournez le bouton à gauche. Une tonalité de notification « clic » retentit si l'appareil est éteint Monter le volume : tournez le bouton dans le sens horaire Baisser le volume : tournez le bouton dans le sens anti-horaire...
1. Connectez le câble USB fourni à l'ordinateur, puis tournez le « bouton d'alimentation/contrôle de volume » dans le sens horaire pour allumer. 2. L'ordinateur détectera le dispositif USB « EDIFIER R19BT » et basculera automatiquement sur la sortie USB de diffusion audio en continu.
1. Appuyez sur le « bouton de sélection de mode » pour basculer sur l'entrée Bluetooth. Le voyant LED bleu clignotera lentement. 2. Sélectionnez « EDIFIER R19BT » dans les paramètres de votre appareil pour vous connecter. Le voyant LED bleu restera allumé après la connexion.
à 1 mètre d’eux, alors il y a un problème avec ce produit. Pour en savoir plus sur EDIFIER, visitez www.edifier.com Pour des demandes relatives à la garantie d’EDIFIER, visitez la page pour votre pays sur www.edifier.com et lisez la section intitulée Modalités de garantie.
Seite 15
être sujets à changements à tout moment sans préavis. Les produits d’EDIFIER seront modifiés pour certaines applications. Les photos, illustrations et spécifications montrées ici peuvent être légèrement différentes du produit réel. Si aucune différence n'est trouvée, le produit réel prévaut.
Seite 16
ES Importantes instrucciones sobre seguridad • Lea atentamente las instrucciones. Consérvelas en un lugar seguro como referencia en el futuro. • Utilice únicamente accesorios aprobados por el fabricante. • Instale correctamente el instrumento siguiendo las instrucciones en la sección de conexión del dispositivo. •...
Contenido de la caja Altavoz pasivo Altavoz activo Cable de audio 3,5mm-3,5mm Manual de usuario Nota: • Las imágenes aparecen con un fin meramente ilustrativo y pueden variar del producto final. • Por motivos de mejora técnica y actualización del sistema, la información y especificaciones aquí...
Uso funcional 1. Puerto de auriculares 2. Interruptor de encendido/control de volumen Encendido: gire el mando a la derecha, se enciende si se escucha un tono de "clic" Apagado: gire el mando a la izquierda, se apaga si se escucha un tono de "clic" Subir volumen: gire el mando en sentido horario Bajar volumen: gire el mando en sentido antihorario 3.
Seite 19
1. Conecte el cable USB incluido al ordenador, y gire el mando "interruptor de encendido/ control de volumen" en sentido horario para encender. 2. El ordenador reconocerá el dispositivo USB "EDIFIER R19BT" y pasará automáticamente a la salida de emisión de audio USB.
USB 1. Pulse el "botón de cambio de modo" para cambiar a la entrada Bluetooth. El LED azul parpadeará lentamente. 2. Seleccione "EDIFIER R19BT" en la configuración de su dispositivo para conectar. El LED azul quedará fijo cuando conecte.
Ruido procedente de los altavoces • Los altavoces EDIFIER generan el menor ruido posible, mientras que otros dispositivos de audio emiten demasiado ruido de fondo. Desconecte los cables de audio y suba el volumen, si no se oye ningún sonido a un metro de distancia del altavoz, el aparato funciona correctamente.
Seite 22
Debido a la necesidad de mejorar técnicas y actualizaciones del sistema, la información aquí contenida puede estar sujeta a cambios ocasionales sin previo aviso. Los productos EDIFIER se personalizan para distintas aplicaciones. Las imágenes e ilustraciones mostradas en este manual pueden ser ligeramente distintas del producto...
Seite 23
DE Wichtige sicherheitshinweise • Bitte lesen Sie diese Anweisungen sorgfältig. Die Anleitung an einem sicheren Ort zum Nachschlagen aufbewahren. • Verwenden Sie nur vom Hersteller zugelassenes Zubehör. • Installieren Sie das Gerät ordnungsgemäß entsprechend den Anweisungen im Abschnitt Geräteanschluss. • Es wird empfohlen, das Produkt in einer Umgebung mit 0-35°C zu verwenden.
Verpackungsinhalt Passiv-Lautsprecher Aktiv-Lautsprecher 3,5-mm-3,5-mm-Audiokabel Bedienungsanleitung Hinweis: • Die Abbildungen dienen ausschließlich zur Veranschaulichung und können vom tatsächlichen Produkt abweichen. • Aufgrund notwendiger technischer Verbesserungen und Systemaktualisierungen können die hierin enthaltenen Informationen und Spezifikationen sich jederzeit vom tatsächlichen Produkt unterscheiden. Bei vorhandenem Unterschied ist das tatsächliche Produkt maßgeblich.
Funktionsweise 1. Kopfhörereingang 2. Netzschalter/Lautstärkeregelung Einschalten: Drehen Sie den Knopf nach rechts. Das Gerät ist eingeschaltet, wenn ein „Klick“ zu hören ist Ausschalten: Drehen Sie den Knopf nach links. Das Gerät ist ausgeschaltet, wenn ein „Klick“ zu hören ist Erhöhen der Lautstärke: Drehen Sie den Knopf im Uhrzeigersinn Verringern der Lautstärke: Drehen Sie den Knopf gegen den Uhrzeigersinn 3.
1. Schließen Sie das mitgelieferte USB-Kabel an den Computer an und drehen Sie den Knopf „Netzschalter/Lautstärkeregelung“ im Uhrzeigersinn zum Einschalten. 2. Der Computer erkennt das USB-Gerät „EDIFIER R19BT“ und schaltet automatisch auf den Ausgang USB-Audio-Streaming um. 3. Wenn nicht automatisch umgeschaltet wird, öffnen Sie bitte die Soundeinstellungen am Computer und wählen Sie das Ausgabegerät „Lautsprecher (EDIFIER R19BT)“, wonach der...
Drücken, um in den Bluetooth-Eingangsmodus zu wechseln USB-Netzkabelstecker 1. Drücken Sie die „Modus-Umschalttaste“, um in die Bluetooth-Eingabe zu wechseln. Die blaue LED blinkt langsam. 2. Wählen Sie „EDIFIER R19BT“ in Ihren Geräteeinstellungen, um eine Verbindung herzustellen. Nach Verbindung leuchtet die blaue LED stetig.
• Stellen Sie eine Verbindung zu einem anderen Bluetooth-Gerät her. Aus den Lautsprechern wird ein Rauschen ausgesendet • Lautsprecher von EDIFIER erzeugen ein geringes Rauschen, wenn das Grundrauschen eines der anderen Audiogeräte zu groß ist. Trennen Sie die Audiokabel und drehen Sie die Lautstärke auf. Sollte in einem Abstand von einem Meter zum Lautsprecher kein Geräusch zu vernehmen sein, dann liegt bei diesem...
Seite 29
Aufgrund notwendiger technischer Verbesserungen und Systemaktualisierungen können die hierin enthaltenen Informationen jederzeit und ohne vorherige Ankündigung geändert werden. Produkte von EDIFIER werden für verschiedene Anwendungen entsprechend angepasst. Die in dieser Bedienungsanleitung verwendeten Fotos und Abbildungen können sich von denen des tatsächlichen Produkts geringfügig unterscheiden. Bei vorhandenem...
Seite 30
IT Istruzioni importanti sulla sicurezza • Leggere attentamente le istruzioni. Conservarle in un luogo sicuro per riferimenti futuri. • Usare esclusivamente gli accessori approvati dal costruttore. • Installare lo strumento correttamente seguendo le istruzioni nella sezione connessione del dispositivo. • Si raccomanda di usare il dispositivo ad una temperatura ambiente di 0-35°C.
Contenuto della confezione Altoparlante passivo Altoparlante attivo Cavo audio da 3,5mm-3,5mm Manuale dell’utente Nota: • Le immagini sono solo a scopo illustrativo e possono differire dal prodotto reale. • Per via di miglioramenti tecnici e di aggiornamenti del sistema, le informazioni e le specifiche contenute nel presente documento potrebbero differire leggermente dal prodotto.
Seite 32
Utilizzo delle funzioni 1. Porta cuffie 2. Interruttore di accensione/controllo del volume Accensione: Ruotare la manopola verso destra, SI ACCENDE quando si sente "clic" Spegnimento: Ruotare la manopola verso sinistra; SI SPEGNE quando si sente "clic", Aumentare il volume: ruotare la manopola in senso orario Diminuire il volume: ruotare la manopola in senso antiorario 3.
Seite 33
1. Collegare il cavo USB in dotazione al computer, quindi ruotare la manopola "interruttore di alimentazione/controllo volume" in senso orario per accendere il dispositivo. 2. Il computer riconosce il dispositivo USB "EDIFIER R19BT" e passa automaticamente all'uscita di streaming audio USB.
1. Premere "mode switch button" (pulsante di selezione della modalità) per passare alla modalità Bluetooth. Il LED blu lampeggerà lentamente. 2. Selezionare "EDIFIER R19BT" nel proprio dispositivo per effettuare la connessione. Dopo il collegamento il LED blu rimarrà acceso fisso.
• Provare a collegare un altro dispositivo Bluetooth. Rumore proveniente dagli altoparlanti • Gli altoparlanti EDIFIER generano pochissimo rumore, mentre il rumore di background di alcuni dispositivi audio è decisamente troppo alto. Scollegare i cavi audio e alzare il volume, se non si avverte alcun rumore a 1 metro di distanza dall'altoparlante, non sussiste alcun problema con questo prodotto.
Seite 36
Per necessità di miglioramenti tecnici e aggiornamenti del sistema le informazioni qui contenute possono essere soggette a modifiche periodiche senza preavviso. I prodotti EDIFIER verranno personalizzati per applicazioni diverse. Le immagini mostrate in questo manuale possono differire leggermente dal prodotto reale.
Seite 37
PT Instruções de segurança importantes • Por favor, leia as instruções com atenção. Guarde-as num local seguro para referência futura. • Use apenas acessórios aprovados pelo fabricante. • Instale o instrumento corretamente seguindo as instruções na secção de ligação do dispositivo. •...
Conteúdo da caixa Altifalante passivo Altifalante ativo Cabo de áudio 3,5 mm-3,5 mm Manual do utilizador Nota: • As imagens são apenas ilustrativas e podem diferir do produto real. • Para a necessidade de melhoramento técnico e atualização do sistema, as informações e especificações aqui contidas podem ser ligeiramente diferentes do produto real.
Seite 39
Operação funcional 1. Porta do fone de ouvido 2. Chave de alimentação/controle de volume: LIGAR: gire o botão seletor para a direita, estará LIGADO após o som de um "clique" DESLIGAR: gire o botão seletor para a esquerda, estará DESLIGADO após o som de um "clique" Aumentar volume: gire o botão seletor no sentido horário Diminuir volume: gire o botão seletor no sentido anti-horário 3.
1. Conecte o cabo USB incluído no computador e, em seguida, gire o botão seletor de "chave de alimentação/controle de volume" no sentido horário para ligar. 2. O computador irá reconhecer o dispositivo USB "EDIFIER R19BT" e mudará automaticamente a saída de transmissão de áudio USB.
Energia USB 1. Pressione o "botão de mudança de modo" para alterar a entrada Bluetooth. O LED azul piscará lentamente. 2. Selecione "EDIFIER R19BT" na configuração do seu dispositivo para conectar. O LED azul ficará aceso continuamente após ser conectado.
Ruído proveniente das colunas • As colunas EDIFIER geram pouco ruído, ao passo que o ruído de fundo de alguns dispositivos de áudio é bastante alto. Desligue os cabos de áudio e aumente o volume, se não escutar nenhum som a 1 metro de distância da coluna, significa que existe um problema com este produto.
Seite 43
Os produtos da EDIFIER serão personalizados para aplicações diferentes. As imagens e ilustrações apresentadas nesta manual poderão ser ligeiramente diferentes do produto real. Se for encontrada qualquer diferença, prevalece o produto real.
Seite 51
RF Power output: ≤10 dBm (EIRP) There is no restriction of use. Hereby, Edifier International Limited declares that the radio equipment type EDF100039 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.edifier.com/int/eu-doc.html...