Valeo CYCLEE VIEW PLUS Bedienungsanleitung Seite 9

To change between gearbox modes press the
gearbox mode button on your deported remote
(1). A long press will put the system in reverse
mode on equipped bikes.
Gearbox in manual mode
In manual mode the rider has control over the gear shifting. The gear
selected is shown in the bottom right corner of the display screen as
a number "N/7".
To change the gear in manual mode press the "+" or "-" buttons on the
deported remote.
"+" to Upshift
"-" to Downshift
The gear-shifting should be used in the same way as with a normal
bicycle. By selecting the correct gear, you can increase your speed
and range while applying the same amount of force on the pedals.
Note: When the selected gear is flashing on the display, the
system indicates that it is not possible to shift the gear. Briefly
stop pedaling to let the gear engage and resume pedaling. Please
refer to your bike shop if this error occurs frequently.
16
Gearbox in automatic mode
In automatic mode, the e-bike smart system is selecting the best gear
available for you according to your pedaling cadence and the terrain
profile.
In automatic mode "A" is showing in the bottom right corner of the
display screen.
The Predictive mode does not allow the switch from Automatic to
Manual gearbox
To change the gear in manual mode, you must be on the Turbo
or Eco mode and then press the Gearbox mode selection button
located on the remote control and then
"+" to Upshift
"-" to Downshift
Gearbox in reverse mode
The reverse mode allows the rider to back up and manoeuver the bike
easily even with heavy payload. Once in reverse mode, the rider can
activate it by pushing gently the throttle of the deported remote.
The reverse mode isn't present on all systems and is usually reserved
to cargo bikes.
In reverse mode "R" is shown in the bottom right corner of the display
screen.
17