Valeo CYCLEE VIEW PLUS Bedienungsanleitung Seite 7

The assistance modes follow this sequence:
OFF
No assistance from motor.
Assistance Mode
TURBO
Maximum assistance level.
Note: in assistance mode "Predict" the assistance is set by the
system according to the rider cadence and power output. In this
mode the gearbox is always set to automatic by the smart e-bike
system. Manual shifting is not possible in Predict mode.
The Predictive mode does not allow the switch from Automatic to
Manual gearbox
To change the gear in manual mode, you must be on the Turbo
or Eco mode and then press the Gearbox mode selection button
located on the remote control and then
«+» to Upshift
«-» to Downshift
Assistance level Description
Off
Assistance deactivated
Eco Battery saver mode
Predict Smart adaptive mode
Turbo Maximum assistance mode
12
ECO
Low assistance to save battery.
Sequence
PREDICT
Smart adaptive mode .
The motor output depends on the force applied on the pedals by
the rider and the assistance mode selected, up to 130 Nm in Turbo or
Predict mode.
V ALEO CYCLEE
Turbo
Note: Default level setting, Max torque and assistance factor may vary depending on the setting chosen by each bike brand.
CYCLIST CADENCE SETTING
Adjusting pedalling cadence
/!\ This set up is only available in "automatic mode"
Availability of this function depends on bikemaker settings.
If available, this setup can be modified according to your need.
Press "+" or "-" for 2 seconds to access the cadence
setting mode
™
Max. Torque 130 N.m
Predict
Max. Torque 80 N.m
Eco
Rider Torque [N.m]
13