Valeo CYCLEE VIEW PLUS Bedienungsanleitung Seite 12

Boost mode
When riding on the bike, you can use the boost mode to accelerate or
climb a slope for a brief period of time.
To activate the boost mode, hold down the throttle when riding. The
throttle acts as an On/Off switch and as soon as you release the
throttle the boost mode will stop.
MAINTENANCE
Maintenance logo
When maintenance is needed on your Valeo e-bike system the display
screen shows the wrench icon. The associated maintenance code is
displayed at the bottom of the screen.
The wrench may be blinking in case of a minor issue or if maintenance
is required.
When a critical error occurs the wrench icon will be fixed and
associated with an error code. When this happens, stop riding your
e-bike immediately and visit your authorized Valeo Cyclee™ dealer.
22
These error codes can also be displayed on the Valeo Cyclee™ Mobile
app when your e-bike is connected by bluetooth.
Simplified
error Component Error name
code
E0500 Motor error Motor is facing
an issue
E0501 Gearbox error Gearbox shifter
is facing an
issue
E0502 Internal Internal voltage
electrical error error or internal
sensor error
E0503 Electrical power Input voltage
error error :
- battery under
/ over voltage
- harness bad
connection
E0504 External Issue detected
electrical error on output port
Example: short
circuit on lamps,
Overvoltage /
undervoltage
MOTOR
E0505 Speed sensor Issue detected
error on speed sensor
E0506 Internal Internal motor
communication error
error
E0507 External Communication
communication error with
error battery or
display
E0508 Over Temperature of
temperature the motor is too
error high
System Action/Solution to
Description
operating solve the issue
Potential root
restriction / Troubleshooting
cause
limitation Corrective action
No assistance Restart the system.
anymore If the issue is still
present, go to your
repairer
Gearbox shifting Restart the system.
is not available If the issue is still
or limited present, go to your
functionality repairer
No assistance Restart the system.
anymore If the issue is still
gearbox shifting present, go to your
functionality can repairer
be impacted
Limited Turn off the system,
assistance or remove and reinstall
No assistance the battery pack.
anymore If the issue is still
present, go to your
repairer
Output port Check lamps (or
disable external devices)
connections.
Disconnect lamps
to see if the issue
disappears. If yes,
lamp is KO
If the issue still present,
go to your repairer
No assistance, Check your speed
and automatic sensor position and
shifting disable look for damages on
the cable.
If the issue is still
present, go to your
repairer
No assistance Restart the system.
anymore If the issue is still
present, go to your
repairer.
Display Check display
communication connectors. Remove
error : system will and reinstall the
turn off battery.
Battery If the issue is still
communication present, go to your
error : no repairer.
assistance
anymore
No assistance Turn off the system
anymore, and let the motor cool
gearbox shifting down.
can also be If the issue is still
impacted present, go to your
repairer.
23