Philips ADD5980M Benutzerhandbuch Seite 22

Note
• Pressing any button
cannot be continued.
• The appliance will automatically
any button can wake up the appliance.
• The total filtered
water tank and the water tank are kept topped
5. Clean and
First time cleaning
1. Preparing the filter cartridge
• Remove the packaging.
is normal. These particles
• Soak the filter cartridge
wash the carbon
O
2 Preparing the appliance
• Remove the inner
• Ensure the seal ring is installed
• Press the filter cartridge
• Reinsert the inner
• Attach the power
• Fill the water tank with 2L of cold tap water and refit the water
• Place drip tray and drip tray plate on the front of the appliance.
• Place a jug or vessel
• Plug the power cord into the mains socket
during dispensing
A new cycle must be started.
go to sleep
(not chilled) capacity
maintenance
t is common
are harmless
in clean water for 15 minutes.
powder on the surface
0
8
water tank.
correctly.
into the the inner water tank. Ensure
water tank into the
cord to the socket
under the dispense
can stop the cycle. Once the cycle
mode if no operation
for this appliance
up
that its surface may have some carbon
and are washed
Shake the filter cartridge
water tank.
at the base of the appliance.
outlet.
and turn on.
EN 18
within I minute.
is 1.41_as long as both the inner
off during the preparation
it is firmly secure.
(B-2)
tank into the appliance.
(B-3)
has stopped it
Touch
powder, this
process.
slightly to
(B-1)