x-sense SWS51 Bedienungsanleitung Seite 9

Note: After replacing the battery, you need to align the positioning points
ofthe upperand lower shellsto closethe cover and then screwthe device
closed.
14
Maintenance
Pleaseshakethe device on your hand a few times after it hassounded
an alarm to remove any water that may have collected in the buzzer
opening, C ean the top and bottom contact probes with a dry cloth
and paper towel, then put the device back in its place.This will ensure
that the device consistently performs we
A WARNING
1_Keepthe device operating at a temperature between 32-1220F
(0 5000 and humidity below 90%RH_
2. Do not disassemblethe device by force. Otherwise,the device may
become damaged.
Technical Specifications
Specifications of Base Station
Model
Power Supply
SafetyStandard
Operating Temperature
SBS50
nput:lOO 240V AC 50/60 Hz
Output: SOV— 10 A
EN
40 100+(4.4 37.80C)