x-sense SWS51 Bedienungsanleitung Seite 8

Silencing the Device
When the device is triggered, simply pressthe Silencebutton on the
water leak sensor or base station to mute the alarm, or turn the Silence
button to mute using the app. If water is no longer on the device
during the silent period, an app push notification will be sent to your
phone, If the device is still soaked in water after being silenced, the
alarm and push notification will not be repeated.After the water leak
sensor is taken out of the water and wiped dry, the app push
notification wil be enabled, and the water leak sensor will return to
normal standby mode.
Unique Features
Remind Me Later: When the device is triggered, "Remind Me Later"
will appear on your phone from the app_You can set a "Reminder Me
Later" timer to silence the water
period of time (10minutes/30 minutes/2 hours/6 hours/1 2 hours),
leak sensor and base station for a
12
When the timer is up, Tthe sensorstil detects a water leak,it wil
resend alerts, If the water leak stops while the timer is running, you'
also be notified. The "Remind Me Later"function can be disabled at any
time. This feature can be used to remind you to resolve a water leak at
a later time.
Low Battery Mode
When the battery is ow, the LED indicator will flash red once every 60
seconds paired with a beep. Your app will warn you with a low battery
notification.
Battery Replacement
When the battery is low, the red LEDwill flash once every 60 seconds
paired with one beep to remind the user to replace the batteries.You
Will receive a low battery notification on your phone via the app. TO
replace the batteries, remove all screws,take out the used batteries,
and replace them with two new AAA batteries.Then, reinstall the
screws and test the device.
13