Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting the Base Station to the Network
1.Connect the base station to a power source with the power adapter.
2. Tap "O" in the app, select "BaseStations",select "BaseStation
(SBS50)" in the product list, and then you will seethe "ScanQRCode"
page. Scanthe QRcode on the bottom of the base station,
3. Enter a name for the base station. Select the home you created or
create a new home for the base station, then select the room in
which it is installed. f you create a new home, you will need to enter
a name and selectthe country or region in which you live.
4. Press and hold the Pair button of the base station for 5 seconds until
the LEDindlcator flashes ye low rapidly, indicating that the base
station is waiting to connect to the Wi-Fi.
Press and
The
LED indicator
will flash yellow
hold
for 5 seconds
06
5.Tap "Operation Confirmed" and then "Next."The page wi show
"Searching for Nearby Bluetooth Devices,"
6. Enter the correct Wi-Fi and password then tap "Next" to add the
device. You will hear'connecting to Wi-Fi "
7. After successfuly connected, you will hear"Wi Ficonnected" and
the "Device Added" page will appear.The LED indicator will stay
solid blue and you can find the base station in the device list.
Connecting the Water Leak Sensor to the Base Station
The water leak sensorconnects to the base station through the
wireless network. When the sensor is connected
you can receive push notifications wherever you areto stay informed
of the device status, and to silencean alarm from your smartphone.
Note: Before adding devices to the system, make sure the base
station has been successfully added to the app.
to the base station,
Werbung
