x-sense SWS51 Bedienungsanleitung Seite 11

Troubleshooting
Problem
Cause
The device does The device
not respond not activated.
when the Test
button is
The batteries
pressed,
have run out
The device does The batteries
not sound when have run out.
there is a water
eak.
The device is
placed on an
unleve
surface.
Solution
is Press and hold the
Test/SiIence/Pair button for
3 seconds to activate the device.
Replacethe batteries.
Replacethe batteries.
Place the device on a eve
surface.
18
A false alarm The device
triggered by
occurs.
water or
metal objects.
The alarm sound Water entered
IS low. the buzzer.
The battery
evel IS low.
is •Touching the sensor probes
with moist hands will cause an
alarm,
• Some water spills, such as while
washing hands, can cause an
alarm, especialy when using
the device in a bathroom.
• High humidity may cause a false
alarm,
• A metal object connecting the
two probes will cause an alarm.
The device itself is waterproof,
and water that goes into the
buzzer will not cause damage to
the product. Pleasetake the
device in your hand and shake it
a few times to remove the water
from the alarm opening until the
alarm sound returns to normal.
Then, put the device back,
Replacethe batteries.
19