Werbung
FILLING YOUR STEAM GENERATOR
Never add fabric conditioner, starches or any other chemicals to the
water in your steam generator. Use cold tap water only in your steam
generator.
1.
Remove the water tank by pressing the water tank release button under-
neath the tank.
2.
Slide the water tank out.
3.
Open the water tank filling cover.
4.
Fill the water tank with cold tap water to the MAX mark.
5.
Close the water tank filling cover and slide the water tank back into the
base unit until it latches securely into place.
Note that when you use your steam generator for the first time or after rins-
ing the boiler, a lot of water will be pumped out of the water tank. Refill the
tank as required.
Filling during use
You can fill your steam generator during use without having to remove the
water tank. The low water indicator light will flash to let you know that the
water tank needs filling.
Simply open the water tank filling cover and add water as required. Do not
fill past the MAX indicator mark on the tank.
4
Werbung
