Herunterladen Diese Seite drucken

Faller SS 200 Bedienungsanleitung Seite 16

Werbung

13.
The power cord is not replaceable by the user. Always return the appli-
ance if the power cord is damaged to avoid any hazard.
14.
Always allow the appliance to cool before cleaning or storing.
15.
Never immerse any part of the appliance or power cord and plug in
water or any other liquid.
16.
Never let the power cord hang over the edge of a worktop, touch hot
surfaces or
BEFORE FIRST USE
Remove all packaging including any soleplate protection before operating
your steam generator.
Wipe over the soleplate with a soft cloth.
Position your steam generator iron horizontally on your ironing board (if it is
large enough) or on a heat resistant and secure surface at the same height
as your ironing board.
Before connecting your steam generator to the mains supply, make sure
your supply voltage is the same as the one indicated on your steam genera-
tor.
When you first use your steam generator, there may be a slight odour and it
may smoke slightly for the first few minutes of operation. This is quite normal
and will disappear.
When you first use your steam generator, iron an old towel to ensure that
any residues inside the iron are not transferred to your laundry.
FEATURES
1.
Steam lock button
2.
Temperature indicator light
3.
Steam trigger
4.
Temperature control
5.
Steam hose
6.
Temperature control ring
7.
Temperature control pointer
8.
Stainless steel soleplate
9.
Boiler rinse plug cover
10.
Boiler rinse plug (underneath
the rinse plug cover)
11.
Iron rest
2
12.
Low water indicator light
13.
Steam indicator light
14.
Steam control
15.
On/off button
16.
Water tank filling cover
17.
Water tank
18.
Water tank release button
19.
Mains power cord storage strap
20.
Mains power cord

Werbung

loading