AgfaPhoto AF 5085S Bedienungsanleitung Seite 29

4 Service
Changing the frame
You can change the frame of the device using the picture
frames supplied. The frames are held with magnets.
1 Press on the change frames button on the back of the
device. Remove the frame.
Information
Problems
Photo Frame does not power on.
Cannot save files
Memory card can not be recognized
Service
2 Place the picture frame onto the device until it engages
on the magnets.
Solutions
Check that you connect the AC adapter to the frame prop-
erly.
Make sure that enough internal memory is available. Re-
start the picture frame and delete some files in order to free
up memory space.
Check whether you have used a compatible memory
card and whether you have inserted the memory card
correctly.
Make sure the memory card is not damaged.
Check that the photo format is supported
EN
7