Initial Operation - AgfaPhoto AF 5085S Bedienungsanleitung

3 Initial Operation

Packing Contents
1 Photo Frame
1 Digital photo frame with bracket
2 Interchangeable Frames
2 Interchangeable frames
3 A Remote Control (with battery)
3 A remote control (with battery)
4 Power supply
4 Power supply
5 USB Cable
5 USB cable
User Guide (not depicted)
User Guide (not depicted)
Verpackungsinhalt AF5085S
Packing Contents
If one of the parts is missing or damaged, please con-
tact your retailer or our customer service.
Mount the Bracket
Mount the Bracket
Assemble the Photo Frame bracket on the back to prop the
player up.
Ständer anbringen
Initial Operation
Connecting the Mains Cable
Mains Voltage at Setup Location
Check whether the mains voltage of your device (in-
dicated on the type label) matches the mains voltage
available at the setup location.
1 Insert the mains cable into the connection located on
the rear side of the device. Connect the mains cable to
the electrical socket. Do not switch on the device!
Inserting a Memory Card
1 Switch the device off using the on/off switch on the
rear.
2 Insert a memory card into the appropriate card slot at
the rear of the device. Your photo frame supports the
following memory cards: SD/MMC/MS/XD.
Only use storage media that are compatible with
the device. In order to prevent damage to the
card or the unit, please turn off the power before
removing or inserting the card.
Never pull out the memory card while the device
is accessing it. This could cause data to be dam-
aged or lost.
3 Switch the device on using the on/off switch on the
rear. The player will start slide show after the start
screen be displayed. Press Z on the remote con-
trol to stop the slide show.
EN
5