Nitho DRIVE PRO ONE V24 Kurzanleitung Seite 8

(1)
After you have setted the wheel and gear shifter as indicated in page 2, connect
the original SONY
provided in the packaging.
(2)
Connect the wheel to the console's USB port and turn the console on.
(3)
The wheel's LED automatically switch on blue colour, then press the PS
on the wheel.
(4)
After connecting the wheel to the console go to: Settings > Pro controller > Set
the option to " ON"
(5)
At this point, the wheel is ready. Play the game and customize your in-game
setup, following the "PS4
Note:
In case you lose the
USB-A to USB Micro B
cable, you can replace
it with any similar cable
available in the market,
paying attention that it
has DATA function.
PlayStation®4 SETUP
controller to the wheel with the USB-A to USB Micro B cable,
®
buttons layout" as displayed in page 6.
®
Note:
You must connect the original SONY® DUALSHOCK 4® controller to
the wheel. Third party's controllers, not officially licensed by SONY®,
are not going to work.
button
®
Page 5