Wifi Function - Renkforce Rf-5798910 Bedienungsanleitung

17 WiFi function

To use the WiFi function, scan the QR code on the right with the camera of
your smartphone and download the relevant app. You can also search for
"XDV PRO" in Google Play Store or Apple Store.
Frequency range: 2.4 – 2.497 GHz; transmission range (when connecting the
app in preview mode): 30 m; transmission power: >19 dBm at 1 Mbps
1. Switch on the camera to activate WiFi and then press and hold the "UP" button. When the camera is connected to
WiFi, the display shows the WiFi ID or password (see picture below). (You can also activate the wireless hotspot
via the system settings.)
2. Open the settings on your smartphone or tablet. Search for the camera's WiFi ID in the WiFi settings, enter the
password and the smartphone will automatically connect to the camera.
3. Disabling the WiFi function: With the WiFi enabled and connected, press and hold the "UP" button. This will
disconnect the camera, and it will return to normal offline mode.
Note:
You can also access and adjust the WiFi settings via the system settings.
48