Maintenance And Storage; Operational Instructions - Bmz Power2Go Work Bedienungsanleitung

The focus of BMZ product development is on safety and reliability. Please read this manual for
important safety information about your device. This manual is designed to help you be more
comfortable and efficient when using this device. Failure to properly set up, use, and care for your
device in accordance with these guidelines may result in damage to the device and cause injury
to yourself or others.
⚫ Always operate or store the appliance according to the stated temperature range.
EN
⚫ Do not expose the unit to fire, liquids, dirt, or other contaminants, as this may result in fire or
electric shock.
⚫ Do not place the unit on unstable or inclined surfaces.
⚫ Please make sure that the place where you are using the unit is well ventilated and spacious.
⚫ Please keep POWER2GO away from children or pets.
Do not ignore the warning signs on parts or products.
⚫
Do not disassemble, cut, crush, puncture, or damage the unit in any way.
⚫
⚫ Do not insert foreign objects into the charging port, discharge port, or any other port.
⚫ Please use an approved charging cable and MPPT accessories.
⚫ In the event of a malfunction, please shutdown POWER2GO immediately.
⚫ In the event of a fire, a dry chemical fire extinguisher should be used.
⚫ No one other than qualified personnel shall attempt to modify or replace the internal parts of
this machine. If necessary, take it to an authorized service center, as incorrect reassembly
may result in a risk of fire or electric shock.

MAINTENANCE AND STORAGE

⚫ When the POWER2GO is not in use for more than three months, charge it to 40%-60% SOC
to keep it in top condition.
⚫ Before storing the device, turn off the power and remove all electrical connections from the
device.
⚫ Store POWER2GO in a cool, dry place with an ideal temperature range of 20°C-30°C.
⚫ For safety, do not store below -10°C or above 45°C for long periods of time.
⚫ If the battery is less than 10% after use, please charge to 80% before storing. If it is idle for
a long time in the case of severe power shortage, it will cause irreversible damage to the
battery cell and shorten the service life of the product.
⚫ It is recommended to cycle every 6 months to maintain the health of the battery.
⚫ If the SOC drops to 0 (while running or starting), take the following steps to safely charge
and start the device:
1) Shut down immediately.
2) Charge within 24 hours.
3) Rest for at least an hour before charging it.

7. Operational Instructions

6
Keep an eye out for these instructions!
Keep an eye out for these instructions!