Pv Charge; Ac Output - Bmz Power2Go Work Bedienungsanleitung

7.2 PV Charge

POWER2GO has a PV charging function, it should be noted that it must be used with the
BMZ matching MPPT adapter.
In the state of power ON or OFF, you can charge the POWER2GO PV, directly plug-in the
DC charging cable (XT90), the circuit will start charging in about 3 seconds to lay self-testing.
EN
The LED indicator will automatically light up to show running light in right to left direction
which serves as a reference for charging.
Note:
⚫ PV charging energy depends on sunlight, it is recommended to use PV charging when
the sunlight is sufficient.
⚫ The maximum power of PV charging is 500W, and the actual power may be lower than
the maximum power due to the angle of sunlight refraction. Note that power mentioned
depends on the solar panel that you will avail. Initially we offer 200W and 400W
accordingly.
⚫ Please make sure your solar panel complies with: Open Circuit Voltage: 15Vdc ~ 60Vdc
Input Power: 500W Max

7.3 AC Output

POWER2GO _WORK has 2 AC output ports, with a maximum total AC output power of
2500W and a peak power of 4400W.
8