Werbung
6
Center it
First thread ribbed end of clear tubing up and
through the opening directly behind the "U"
shaped cut out on the center cap (F) as shown.
F
7
The hose goes through the table
1
Feed open end of the hose through the
CORNER opening in the center of the
table top (part A) (as shown).
2
Press center cap onto connector assembly while
inserting the (3) center columns.
3
ALIGN NOTCHES on the center cap
(part F) to the nothces on the table.
Snap into place.
7
Then snap the (3)
center columns into
the center cap.
F
Werbung
