IFM Electronic Efector200 Bedienungsanleitung Seite 15

Manual setting of the switching threshold (2)
• Stationary objects / through-beam fibre (FE ...)
1
Press until the row of LEDs flashes.
2
Press the "-" button until the
row of LEDs indicates the
lowest switching threshold.
Place the object into the
detection area.
3
Press the "+" button until the
unit switches (yellow LED lights
or goes out).
4
Press until the row of LEDs flashes.
manual range
manual range
manual range
manual range
Green LED flashes,
yellow LED indicates the
switching status
(= unit is in the
programming mode).
or
Green LED lights
(= unit is in the
operating mode).
15